FINAPRES Finometer Model-2 - Miscellaneous Errors During a Measurement; Errors Due to Missing Sub Device; Fatal Internal Errors

74 Finometer® Model-2 User’s Guide
7.2.3 Miscellaneous errors during a measurement
Error message Action
MEASURED 12 HRS more then 12 hours on the same finger. Measured
PREMATURE STOP When operator presses the start/stop key during the
start phas e of the measurement.
7.2.4 Errors due to missing sub device
Error message Description
RECONNECT HEIGHT Height Corr
during mea
immediatel
ection Unit removed from Frontend Unit
surement. Measurement will be stopped
y.
RECONNECT FE Frontend Unit n Frontend Unit is
disconnecte
will be stop d immediately.
not connected. Whe
d during measurement, the measurement
pe
CONNECT CUFF The finger c
Unit.
uff cable is not connected to the Frontend
7.2.5 Fatal internal errors
When one of these errors is due,
F cal Sy tems B.V
operator about this in the foll
the system should be returned to
. for repair. The system informs the
owing way:
inapres Medi s
Physiocal Height
PWR OFF:CALL FMS
A/D CNV
Systolic Diastolic
NOT WELL
Mean Rate (bpm)