60 Finometer® Model-2 User’s Guide
3. Configure BeatScope® Easy if necessary (e.g. correct serial port
number).
During an online ® Easy the pressure
waveform is displ ends of systolic, diastolic,
mean pres n panel. Cardiac
output is shown in
With BeatScope® Easy it is possible to configure a user specific set in
panels, presented waveforms and tr
the blood pressure waveform.
recording with BeatScope
ayed in one panel and tr
sure a d heart rate are shown i
a third panel.
n a second
ends. The choice for FIN (finger
pressure) or BRA (reconstructed brachial artery pressure) as the basis
for the derived beat-to-beat blood pressure data is made from the
BeatScope® Easy PC program before starting up a measurement.
It is also possible to configure a wide range of settings for the analog
I/O of Finometer® Model-2.
Note: The optional ECG can be displayed on the PC screen
simultaneously with
To Next Page
Loading...
