FireClass FC501-L - KEY- View NETWORK; Key- Communicators

5 KEY- View NETWORK
Use the 5 Key to view the Network devices: MFI mod
-
ules (max 4) and Repeaters (max 4) (see Figure 23).
The field Network devices status displays the related
output status using abbreviations.
The abbreviations are:
“ OK!”, the net. device is sensed as connected and
working
“ Ko!”, the net. device is sensed as not connected
“ FAU”, the net. device is faulty
“ DIS”, the net. device is disabled
“ — ”, the net. device is not configured in the network
“ OLD”, the net. device has an obsolete FW version.
In this phase:
Alphanumeric keypad No function is related to Al
-
phanumeric keypad.
Cursor Keys No function is related to the UP, Down,
Right, Left Key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key No function is related to the ENTER key.
6 KEY- COMMUNICATORS
The 6 Key is used to view the Communicator connected
to the control panel, see Figure 24. In addition to the
Firmware version, the FC500IP module status and the
address will be displayed.
In this phase:
Alphanumeric keypad No function is related to Al
-
phanumeric keypad.
Cursor Keys No function is related to the UP, Down,
Right, Left Key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key No function is related to the ENTER key.
VIEW-LOG-PARAMETERS 19
PANELS MS S1 S2 S3 S4 S5 S6 S7
ok! ok! ok! ok! ok! ok! ok! ok!
REPEATERS R1 R2 R3 R4 R5 R6 R7 R8
ok! ok! ok! ok! ok! ok! ok! ok!
Network type
devices
Link status
Figure 23 Example of Display: View Network (MFI mo
-
dules and Repeaters).
FW ver. Address
IP: OK! 01.00.09 255 255 255 255...
Type of Communic.
Firmware Rev.
Communicators status
IP Address of the
FC500IP module
Figure 24 Display Communicators.