4 Key-Time and Date
Use the 4 Key to select TIME and DATE in the MODIFY
menu to enter/change the control panel Time and Date
(see Figure 34).
In this phase:
Alphanumeric keypad The alphanumeric keypad is
used to enter the Time and Date values.
Cursor Keys No function is related to the UP Key;
No function is related to the Down Key;
Use the Right Key to select the next value to be in
-
serted/modified;
Use the Left Key to select the previous value to be in
-
serted/modified;
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key Use the ENTER key to confirm the Time
and the Date.
+
If you enter incorrect values a message will show
the error as shown in Figure 34a.
5 Key- Clear LOG
Use the 5 key to select Clear LOG (see Figure 35).
If the user or installer needs to clear the LOG then this
option will generate CLEAR LOG in the list of events.
This CLEAR LOG event is the last event the user can
see in the entire LOG. The installer continues to have
access to the entire LOG.
+
If the 5 Key is selected, confirmation of this deletion
will be requested, as all data will be lost.
In this phase:
Alphanumeric keypad No function is related to the al
-
phanumeric keypad.
Cursor Keys No function is related to the UP, Down,
Right and Left Key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key Use the ENTER key to confirm the proce
-
dure to clear Log.
+
During the Clear LOG activity the MAIN page will
be displayed with the Panel activity field loaded
with CLEAR LOG string (see Figure 3435). Once
the Log has been cleared, the panel resets.
MODIFY 25
To Next Page
Loading...
