MODIFY
MODIFY MENU
For the MODIFY option, from the MAIN page, press the
3 key.
To access the MODIFY Menu:
Enter the User Access code (11111 at default), each
digit will be masked by
* (asterisk).
The following options are available in this menu:
1-Clear and update the Welcome message (Init MSG)
(control panel name),
2- Enter and update L2- User Password,
3- Update Day/Night mode
4- Update Time and Date
5- Clear LOG
6-Zone Walk test.
Figure 30 shows the options for the MODIFY MENU af-
ter inserting or modifying the password.
In this phase:
Alphanumeric keypad Use the Alphanumeric keypad
to select the options of MODIFY MENU.
Cursor Keys No function is related to the UP, Down,
Right and left Key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key No function is related to the ENTER key.
1 KEY -INIT MSG (Modify panel label)
Use the 1 Key to enter or update the Panel label.
In this phase:
Alphanumeric keypad The Alphanumeric keypad is
used to enter or update the panel label.
Cursor Keys Use the UP key to change the selected
letter from lower case to upper case;
Use the Down Key to change the selected letter from
upper case to lower case;
Use the Right Key to select the next character to be
modified;
Use the Left Key to select the previous character to be
modified.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key Use the ENTER key to confirm the label.
MODIFY 23
To Next Page
Loading...
