FireClass FC501-L - DISABLE MENU Operations; Disabling Passwords and Fire Relay

7 Key-Password (Disable)
This option is enabled only if you enter in the Control
Panel using a Master Installer PIN (Default 00000).
The Key 7 is used to select the Disable Password op
-
tion, after the option has been selected the correspond
-
ing password will be disabled/enabled (Figure 44).
n
Select the Password
In this phase:
Alphanumeric keypad Use the Alphanumeric keypad
to select the identification number of Password.
Cursor Keys Use the UP Key to show the next type of
password;
Use the Down Key to show the previous type of pass
-
word. The types of password are User Password and
Installer Password.
No function is related to the Right and Left Keys.
ESC Key Use the ESC key to cancel the operation and
to return to previous page.
ENTER Key Use the ENTER Key to confirm.
n
Disable Password
In this phase, the display shows the current status of the
selected Password (User or Installer). The possible ac-
tions are: ENABLE or DISABLE.
Alphanumeric keypad No function is related to Al-
phanumeric keypad.
Cursor Keys No function is related to the UP, Down,
Right and Left Keys.
ESC Key Use the ESC key to cancel the operation and
to return to previous page.
ENTER Key Use the ENTER Key to confirm. The User
Interface moves to the MAIN page followed by a panel
reset.
8 Key - Fire Relay
Use the 8 key to select “Fire Relay”; the “Fire Relay”
output can be Disabled/Enabled (see Figure 45).
The field “Current enablement status” displays the cur
-
rent enablement status of the selected item.
The possible status are:
“ENABLED”
“DISABLED”
The Item “Action to do” contains the following actions:
“ENABLE IT?”
“DISABLE IT?”
In this phase:
Alphanumeric keypad No function is related to Al
-
phanumeric keypad.
Cursor Keys No function is related to the UP, Down,
Right and Left Keys;
ESC Key Use the ESC key to cancel the operation and
to return to previous page.
ENTER Key Use the ENTER Key to confirm. The User
Interface moves to the MAIN page followed by a panel
reset.
32 Addressable Fire Control Panels FC501
FC501 Panel lev.2 : DISABLE
User Pwd
Password Type
FC501 Panel lev.2 : DISABLE
User Pwd
Disabled it?
ENABLED
Present status
Password
Dis./Enable
Request Enabled/Disabled
UP or Down per to select the type
If it blinks the panel
is operating normally
Control Panel name
Access Level
Control panel
Status
Enter the User Pwd number
Figure 44 Display Enabled/Disabled Password.
FC501 Panel lev.2 : DISABLE
Fire Relay FIRE
DISABLE it?
ENABLED
Present status
FIRE Relay
Dis./Enable
Action to do
Control Panel name
If it blinks the panel
is operating normally
Access Level
Control panel
Status
Current enablement
status field
Figure 45 Display Enabled/Disabled FIRE Relay.