TABLE OF CONTENTS
INTRODUCTION 5
FC501 Fire Control Panel 5
Accessory items 5
User Access Level 5
USER INTERFACE 6
Description of Keys 6
Panel Command keys description (Table 1) 6
Silence/Resound/Sounders 6
Reset 6
Key Help 7
Signalling 7
The status LEDs 7
Buzzer (Audible Signals)
7
Description of the Repeater FC500REP LEDs 7
DISPLAY 7
START-UP PAGE 7
FRONT PAGE 9
MAIN PAGE 9
Diagnostic pages 10
MENU page 10
The EVENT DRIVEN pages 10
WARNING STATUS 10
Delay to Alarm STATUS 11
ALARM STATUS 12
FAULT STATUS 13
Locate loop break pages 14
Locate the not addressed devices 14
VIEW-LOG-PARAMETERS 15
View parameters 15
1 KEY - View Loop 16
View of Loop Details 16
2 KEY - View Devices 16
Select the Loop 16
Select the device 16
View device data on the Loop 17
3 KEY- View SW Zone 18
4 KEY- View Output 18
5 KEY- View NETWORK 19
6 KEY- COMMUNICATORS 19
7 KEY- View Option 20
8 KEY - View Log 20
View Log 20
9 Key - View FW version 21
0 Key-Panel 21
View Lists 22
MODIFY 23
MODIFY MENU 23
1 KEY -INIT MSG (Modify panel label) 23
2 KEY - User Password 24
Insert or Modify Password 24
3 KEY-DAY/NIGHT 24
Day/Night Mode 24
4 Key-Time and Date 25
5 Key- Clear LOG 25
6 KEY- WALK TEST 26
DISABLE 27
1 Key - Disable list 28
2 Key - Devices (Disable) 28
Select the Loop 28
Select the Device 28
Disable device on the Loop 28
3 Key - SW zone 29
Select SW zone 29
Disable SW Zone 30
4 Key - Outputs 30
Select the Output 30
Disable Output 30
5 Key - Network 30
Select the Network device 30
Disable Network device 30
6 Key - COMMUNIC. (Disable) 31
Select the COMMUNIC. device 31
Disable COMMUNIC. device 31
7 Key-Password (Disable) 32
Select the Password 32
Disable Password 32
8 Key - Fire Relay 32
Repeater FC500REP Signalling 33
Description of command Keys 33
LCD DISPLAY DESCRIPTION 33
EVENT DRIVEN page description 33
Description of Status LED 33
To Next Page
Loading...
