FireClass FC501-L - Viewing Panel Data and Parameters

9 Key - View FW version
The option Ver. FW of the View Parameters Menu al
-
lows you to view the Firmware version of Fire control
panel.
Use the 9 key to view the Firmware version of Fire con-
trol panel (see Figure 28), in this phase:
Alphanumeric keypad No function is related to Al-
phanumeric keypad.
Cursor Keys No function is related to the Up, Down,
Right and Left Key.
ESC Key Use the ESC key to cancel the operation and
to step back to MAIN page.
ENTER key No function is related to the ENTER key.
0 Key-Panel
By pressing the 0 key, in the ANALYZE menu, it is pos
-
sible to read:
- the fire panel ID
- the serial number of the Fire Panel (displays the elec
-
tronic board serial number composed by eight
hexadecimal digits);
- the version of the PCB;
- the type of power supply on board;
- the type of batteries on board
- the presence of the auxiliary controller (see Figure 29).
In this phase:
Alphanumeric keypad No function is related to Al
-
phanumeric keypad.
Cursor Keys No function is related to the Up, Down,
Right and Left Key;
ESC Key Use the ESC key to step back to ANALYZE
menu page.
ENTER key No function is related to the ENTER key.
VIEW-LOG-PARAMETERS 21
Total :0297 status: VIEW LOG
Event :0292 RESTORE
MS:Loop 2 det191 zone=002
08:43:11 - 01/01/07
Total :0297 status: VIEW LOG
Event :0292 RESTORE
Zone: Reception
08:43:11 - 01/01/07
Total :0297 status: VIEW LOG
Event :0292 RESTORE
Cause:8011H NO DATA
08:43:11 - 01/01/07
Push the right key to scroll
the second block of data
regarding the zones in the LOG
Push the right key to scroll
the third block of data
regarding the causes in the LOG
Figure 27 View LOG: scroll with RIGHT key.
FIRMWARE VERSIONS
MAIN CONTROLLER ver 01.00 sv01
AUX. CONTROLLER ver 01.00 sv03
If it blinks the panel
is operating normally
Figure 28 Display: Viewing FW version.
Total :0297 status: VIEW LOG
Event :0292 RESTORE*
MS:Loop 2 det191 zone=002
08:43:11 - 01/01/07
Total stored Events
At present
stored events
This symbol: shows the presence of
following blocks which roll by DX key
( which came before by SX key)
1° block
Events
Type
Time and date
conncted to
the event
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel status
If present, it shows the filtered
view by type of events
Figure 29 Display: Viewing Panel info.