View Lists
Directly from the MAIN page, press 4 =MORE Key and
then 2= View Lists.
The option View Lists allows you to view:
Ø
1- Dis. Zone-Disabled zones
Ø
2-Dis. Device-Disabled devices
Ø
3-Dis. Part-Disabled Parts
Ø
4-Walk test - Walk test Zones
Ø
5-Faults List
Ø
6-Warnings List
Ø
7-Dev. in test (Devices in test).
+
The lists containing data (not empty) are indicated
by the blinking of the corresponding number
In this phase:
Alphanumeric keypad Alphanumeric keypad is used
to select and access the View function (see options
above).
Cursor Keys No function is related to the Up, Down,
Right and Left key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key No function is related to the ENTER key.
The field “Item in the list” contains the number of items
present in the list at the moment of it opening.
The field “Current item ID” contains the number ID of
the currently displayed item.
The field “Kind of list” replicates the name of the list pre-
viously selected.
The field “Item info” displays the information about the
item currently selected. It shows the location of the SW
zone and loop device or the description of a system part
plus the related label.
In this phase (second Display in Figure 30):
Alphanumeric keypad 1 Key: to call the enablement
page to quickly enable the displayed entity.
Cursor Keys The UP Key, used to navigate the list,
displays the next element;
The Down Key, used to navigate the list, displays the
previous element;
No function is related to the Right key;
No function is related to the Left key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
ENTER key No function is related to the ENTER key.
22 Addressable Fire Control Panel FC501
To Next Page
Loading...
