1 Key - Disable list
Use 1 key, or from MAIN page use 4 key (More) and then
2 to select “View List”; (see Figure 38) In this phase:
+
If any of the elements have been disabled, the cor
-
responding number will blink and the Disable indi
-
cator light will glow. If the Communicator is
disabled, the yellow indicator light (Communicator)
will also glow.
Alphanumeric keypad Used to select list to analyze.
1- To view the list of disabled zones
2- To view the list of disabled loop devices
3- To view the list of disabled system parts (Outputs,
Communicator).
Cursor Keys No function is related to the UP, Down,
Right and Left Key;
ESC Key Use the ESC key to cancel the operation and
to step back to MAIN page.
ENTER key No function is related to the ENTER key .
+
See paragraph View List in the chapter “View Pa
-
rameters”.
For Disabled zones, Loop devices and System parts,
see Figure 38 (second display). In this phase:
Alphanumeric keypad Press 1 to call the enablement
page to quickly enable the displayed entity.
Cursor Keys Use the UP key, to select previous item;
Use Down key to select next item.
No function is related to Right and Left Keys;
ESC Key Use the ESC key to cancel the operation and
to step back to MAIN page.
ENTER key No function is related to the ENTER key.
2 Key - Devices (Disable)
Use the 2 key to select “Device” Disable. The Loop can be
selected (see Figure 39).
n
Select the Loop
In this phase:
Alphanumeric keypad No function is related to Al
-
phanumeric keypad.
Cursor Keys No function is related to the UP Key;
No function is related to the Down Key;
Use the Right Key to select the next Loop;
Use the Left Key to select the previous Loop.
ESC Key Use the ESC key to cancel the operation and
to step back to main page.
ENTER key Use the ENTER key to confirm and to dis
-
play the page of the selected Loop.
n
Select the Device
In this phase:
Alphanumeric keypad Use the Alphanumeric keypad
to insert the device address.
+
If the device is in the system, the square brackets
will be shown near the address. If the address does
not exist or it is different from that selected in the
underlying bar, the arrows will be shown.
Cursor Keys No function is related to the UP Key;
No function is related to Down Key;
Use the Right Key to select the next available Device;
Use the Left Key to select the previous available device.
ESC Key Use the ESC key to cancel the operation and
to step back to main page.
ENTER key Use the ENTER key to confirm and to dis
-
play the page of the selected device.
n
Disable device on the Loop
Selected the Loop and then the device, the Display will
show the third display in Figure 39.
The display shows the current status of the device, the
possible actions are: ENABLE or DISABLE.
In this phase:
Alphanumeric keypad No function is related to Al
-
phanumeric keypad.
Cursor Keys No function is related to the UP, Down,
Right and Left Key.
ESC Key Use the ESC key to cancel the operation and
to step back to previous page.
28 Addressable Fire Control Panel FC501
To Next Page
Loading...
