–6 –
CONVENTIONS USED IN THIS MANUAL
MAIN SECTION TITLES ARE SHOWN IN REVERSE TYPE
Before you begin using this manual, it is important that you understand the
meaning of the following symbols (icons).
U
L
These notes include specific information which must be followed if you are
installing this system for a UL Listed application.
These notes include information that you should be aware of before
continuing with the installation, and which, if not observed, could result in
operational difficulties.
This symbol indicates a critical note that could seriously affect the operation
of the system, or could cause damage to the system. Please read each warning
carefully. This symbol also denotes warnings about physical harm to the
installer.
✱
20 INSTALLER CODE
In the text of this manual, basic programming data fields are indicated by a ÒstarÓ (
✱
)
followed by the data field number and its title.
Enter Zn Num.
(00 = Quit) 01
In the text of this manual, interactive programming prompts are shown in a double-line
box (e.g. Menu Mode *56 for Zone Programming).
PRODUCT MODEL NUMBERS
Unless noted otherwise, references to specific model numbers represent Ademco
products.
To Next Page
Loading...
Need help?
General
