First Alert FA162C Installation Instructions

–68–
✳ ZN 01 BACK
DOOR ÊÊÊ
+
Flashing Cursor if Ò6Ó is
pressed (system ready for
next word).
Ê9. Press Ò6Ó to accept the selected
ÊÊword.
ÊNOTE: If these are the only words
you ÊÊare using for the descriptor,
press Ò8Ó ÊÊinstead of Ò6 Ó to save them
in ÊÊmemory.
10. The two words in our example have
now been entered. Note, however,
that up to three words may be
entered (provided the number of
characters will fit on the screen).
Press Ò8Ó to save all words in
memory.
Summary Display
✳ ZN 01 BACK
DOOR
The flashing cursor will disappear,
indicating that the word(s) are stored
in memory for that zone, as shown in
the summary display at the left.
11. To enter a descriptor for the next
zone, press
✱
plus the desired zone
number (e.g.,
✱
02. The summary
display following step 4 previously
will appear. Now repeat steps 6
through 10 for the descriptor for the
next zone.
12. To exit the Alpha descriptor mode,
press Ò
✱
+0+0 Ó at the summary
display.
Program Alpha ?
0 = No, 1 = Yes 00
This prompt will be displayed.
Alpha Pgm
82
13. Press Ò0Ó. This will be displayed.
14. Press
✱
99 to exit the programming
mode.

First Alert FA162C Specifications

General

Brand	First Alert
Model	FA162C
Category	Security System
Language	English