Fischer Panda 8000x - Panel Submenu Settings; Generator Submenu Settings

Panda xControl
Seite/Page 168 - Kaptitel/Chapter 11: Panda xControl 10.6.16
11.1.6 Submenu „Panel“
Fig. 11.1.6-1: Submenu „Panel“
11.1.7 Submenu „Generator“
Fig. 11.1.7-1: Submenu „Panel“In the submenu „Panel“ following points can be set up
1. Brightness of the panel
2. Contrast of the panel
3. Standby time out of the Panel
4. Standby brightness of the panel
5. Way of illustration (symbolic or text) of the overview
screens
6. Language of the text screens
7. Temperature unit (°C or °F)
8. Reset the panel submenu to standard
9. back to the main menu
11.1.7.1 Set up the brightness of the CP-G
Scroll with the „Step-up“/“Step-down“ buttons to the menu point „brightness“ and confirm with the „Start/Stop - Enter“
button. You enter the menu point brightness.