Fischer Panda 8000x - Page 174

Panda xControl
Seite/Page 174 - Kaptitel/Chapter 11: Panda xControl 10.6.16
If any failure occur while the generator is starting or running,
the generator will stop and the „Automatic Start“ will fall back
to „off“.
The first overview screen will show you, if the autostart is enabled
Fig. 11.1.8-2: Overview screen 1 symbolic with autostartOverview screen 1 symbolic with autostart enabled
Fig. 11.1.8-3: Overview screen 1 english text with autostartOverview screen 1 english text with autostart enabled
Fig. 11.1.8-4: Overview screen 1 german text with autostartOverview screen 1 german text with autostart enabled
If the generator is running in the autostart mode and stopped manually, the autostart will fall back to „off“.
01
02
03
05
04
01
02
03
05
04
01
02
03
05
04