EasyGrid User Guide MAN-00084 R 11.0
30
Set the Seasonal offset value to offset the relay
Setpoint for the selected period by pressing on
the corresponding digit. Type in a value using
the Numeric key pad.
For example, Setpoint may be decreased by 5°C
for the summer period.
This function is inactive when the offset is 0.0°C.
* Same for ALL relays
Any positive or negative value, as long as the
resulting temperature value is within the
calibration range.
Press to exit or to confirm.
NOTE: After a parameter is created or modified, remember to press the button when prompted,
before leaving the active screen so that the parameter is stored or the action executed.
Allows testing of the specific relay in the test
option screen .
Allowed: The relay can be tested .
Not Allowed: No tests are allowed on this relay
.
To Next Page
Loading...
Need help?
General