Fiso EasyGrid User Manual

EasyGrid User Guide MAN-00084 R 11.0
33
Exerciser Function – Enable
Description
To access the Exerciser Function found in the
Test Relay screen, press the Test Option icon
in the bottom row of any Alarm Settings screen.
Each individual Relay can be configured to be
exercised (for example to make sure a set of
cooling fans are functioning properly) on a
regular basis. Enable the Exerciser Function for a
specific Alarm/Relay by pressing the icon
corresponding to the Alarm/Relay number you
wish to Enable.
Range
Enable: Exerciser Function is active .
Disable: Exerciser Function is inactive .
NOTE: After a parameter is created or modified, remember to press the button when prompted,
before leaving the active screen so that the parameter is stored or the action executed.
Exerciser Period
Description
Each individual Relay can be configured to be
exercised for a different duration of time
(Period). Select the Exerciser Period by pressing
the digit corresponding to the Alarm/Relay
number you wish to set.
Range
1 to 59 minutes.
Press to exit or to confirm.

Fiso EasyGrid Specifications

General

Brand	Fiso
Model	EasyGrid
Category	Measuring Instruments
Language	English