flamco Flamcomat G4 - Required Qualifications and Assumptions; Staff Qualification and Training

Manual Flamcomat G4 + Flamcomat Starter G4 We reserve the right to change designs and technical specifications of our products.
8
ENG
4.3 Qualifications required, assumptions
All personnel must have the relevant qualifications to carry out the required services and be physically and
psychologically capable. The area of responsibility, competence and supervision of personnel is the duty of the
Operator.
Required service Professional group example Relevant qualifications example
Storage, transportation Logistics, transport, warehousing Transport and warehousing specialist
Assembly, disassembly, repairs, maintenance.
Re-commissioning aer adding or changing
components. Inspection.
Installation and building services HVAC specialist.
First commissioning of configured control unit
(generic), re-commissioning aer power cut,
operation (work on the terminal and Flextronic
control unit)
People with operations room clearance with
knowledge gleaned from this guide.
Electrical installation Electrical engineering Specialist in electrical engineering/ installation
Initial and re-inspection of electrical systems Qualified person (QP) with certification in Electrical
Engineering
Inspection before commissioning and re-inspection
of pressure equipment
Installation and building services engineering
performed in the context of technical inspection.
Qualified Person (QP)
4.4 Sta qualification
Operating instructions are transferred by Flamco representatives or others assigned by them during delivery
negotiations or on demand.
Training for the required services, installation, dismantling, commissioning, operation, inspection, maintenance
and repair are part of the training / further education for service engineers of the Flamco branch oices or named
service contractors.
These training courses cover information on required installation conditions, but not their implementation.
On-site services include transportation, the preparation of an operations room with the requisite foundation
engineering to accommodate the system, and the requisite hydraulic and electrical connections, the electrical
installation for the power source of the expansion automat and installation of the signal leads for the IT
equipment.