User’s manual
FlexGain Plex, V2
Content.
Version control.
Introduction.
PART 1. Technical description.
1.1 Application and general information about the FlexGain Plex, V2 multiplexer.
1.2 Features.
1.3 Ordering information.
1.4 Description of the FlexGain Plex ,V2 multiplexer.
1.4.1 General information on the device operation.
1.4.2 Brief description of the device operation.
1.4.3 Interfaces and LEDs.
1.4.4 Alarm signaling.
1.5 Е1 interfaces.
1.6 V.35 interface.
1.7 Ethernet interface.
1.8 Daughter board interfaces.
1.9 Signaling.
1.9.1 Transparent.
1.9.2 MMX (subscriber).
1.9.3 Definity®.
1.9.4 MEGATRANS.
1.10 lock modes.
1.10.1 Internal clock.
1.10.2 Е1 clock.
1.10.3 External clock.
1.11 V.35 clock.
1.12 Use of clock modes.
1.13 Cross-connect of Е1 streams.
1.14 Management.
1.14.1 Local management.
1.14.2 Network management via the TELNET protocol.
1.15 Test loops.
1.15.1 E1 loops.
1.15.2 V.35 loops.
1.16 Use of the cyclic redundancy check in the E1 stream.
1.17 Mechanic design.
1.17.1 Sub-Rack
1.17.2 Mini-Rack
1.17.3 Stand Alone
Part 2. Installation and programming guide.
2.1 Installation and cabling.
2.2 Configuration of FlexGain Plex, V2 devices.
2.2.1 Commands. Command structure.
2.2.2 Description of commands.
2.2.2.1 Command syntax.
To Next Page
Loading...
