FlexGain PLEX - Page 46

User’s manual FlexGain Plex, V2
Version 1.3
46 from 99
MODEL FG-PLEX2-SR
HW 2.0
SW 1.09
DATE 07-10-2005
ID NAME01
RUNS 0d 05:51:22
ALARM URGENT
STATUS NORMAL
MODEL_DESC Subrack Universal Flexible Multiplexer
IP 010.003.003.003
Copyright (C) 2005 by Nateks Ltd.
------------- Main Menu -----------------
1. Performance management (PM)
2. Fault and maintenance management (FMM)
3. Configuration management (CM)
4. Network management (NM)
5. Exit
-----------------------------------------
Select [1..5]
PLEX2_01_MM>
To select the desired sub-menu, type the appropriate number from “1” to “5” and
press<enter>.
The command line has the following form:
PLEX2_хх_уу>
Табл. 7. Структура приглашения.
PLEX2 Type of the equipment manufactured by Nateks (FlexGain Plex, V2)
Хx Number of the slot in the shelf, for example, rack. This field is absent
for Mini-Rack and StandAlone multiplexers.
Уу Short form of the current menu:
ММ – Main Menu.
PM – Performance management.
FMM – Fault and Maintenance Management.
CM – Configuration Management.
NM – Network Management.
The <H> (help) command is available in any sub-menu. This command lists all
possible commands in this menu. The <M> command returns the user to the main menu.
Brief description of commands (context help) is displayed by entering:
<command> /H.
Example:
PLEX2_01_CM>CONFIG /H