User’s manual FlexGain Plex, V2
Version 1.3 6 from 99
Introduction.
The present document describes a subscriber TDM (Time Division Multiplexing)
FlexGain Plex, V2 multiplexer (hereafter referred to as a ‘multiplexer’, ‘device’, ‘module’).
The document contains the technical description of the device, installation, configuration
and operating instructions. Appendices containing additional information about the
multiplexer form also an integral part of the present document.
Note! Nateks may make improvement or changes in this document at any time and
without notice and as it sees necessary. The information in this document was prepared by
Natesk with reasonable care and is believed to be accurate. However, Nateks shall not
assume responsibility for losses or damages resulting from any omissions, inaccuracies or
errors contained therein. Any time when users have problems on our products and network
operation, they can feel free to contact us by sending a request to help@nateks.ru
.
The equipment has been certified and has a certificate of conformity OS-1-SP-
0017.
To Next Page
Loading...
