FLUXUS WD100, WD200 7 Installation of the Transducers
34 UMFLUXUS_F5WDV1-1EN, 2016-04-08
7.3.1 Disassembly of Variofix C
• Disassemble the transducer mounting fixture Variofix C.
In order to remove the cover from the rail, bend the outer sides of the cover outwards (see Fig. 7.5).
In order to remove the spring clip from the rail, slide it over the indentation on the rail and lift it off (see Fig. 7.6).
Fig. 7.4: Scope of delivery
Fig. 7.5: Removal of the cover
Fig. 7.6: Disassembly of Variofix C
1 Variofix C
1 transducer pair
1 tension strap coil
2x ratchet clasp
(optional)
cover
rail
spring clip
tensioning screw
spacing element
tension strap clamp
indentation
To Next Page
Loading...
