8062A
Instruction Manual
5-4
5-3. Manual Status Information
The Manual Status Information table that precedes the parts list defines the
assembly revision levels that are documented in the manual. Revision levels
are printed on the component side of each pca.
5-4. Newer Instruments
Changes and improvements made to the instrument are identified by
incrementing the revision letter marked on the affected pca. These changes
are documented on a manual supplement which, when applicable, is included
with the manual.
5-5. Service Centers
To locate an authorized service center, call Fluke using any of the phone
numbers listed below, or visit us on the World Wide Web: www.fluke.com
1-800-44-FLUKE (1-800-443-5853) in U.S.A and Canada
31 40 267 8200 in Europe
1-425-356-5500 from other countries
Note
This instrument may contain a Nickel-Cadmium battery. Do not mix with the
solid waste stream. Spent batteries should be disposed of by a qualified
recycler or hazardous materials handler. Contact your authorized Fluke
service center for recycling information.
Warning
This instrument contains two fusible resistors (pn
474080). To ensure safety, use exact replacement only.
To Next Page
Loading...
