Running Individual Tests
Single Test Results for Twisted Pair Cabling
4
4-15
Impedance
The impedance test and results are identical to the Autotest version. See
“Impedance” in Chapter 3 for details.
Attenuation (Insertion Loss)
The attenuation test and results are identical to the Autotest version. See
“Attenuation” in Chapter 3 for details.
Resistance
If a remote is connected, the results displayed are identical to the display in
Autotest. See “Resistance” in Chapter 3 for details.
If a remote is not connected, the test tool displays the message NO REMOTE
DETECTED and all pair resistances are reported as OPEN. A cable pair with a
resistance greater than 400 Ω is also reported as OPEN.
Return Loss (RL) and RL@REMOTE
The RL test and results are identical to the Autotest version. See “Return Loss” in
Chapter 3 for details.
Power Sum NEXT and Power Sum NEXT@REMOTE
The PSNEXT test and results are identical to the Autotest version. See "PSNEXT"
in Chapter 3 for details.
Power Sum ELFEXT
The PSELFEXT test and results are identical to the Autotest version described in
Chapter 3.
To Next Page
Loading...
