Maintenance and Specifications
Maintenance
13-3
13
Note
The DTX serial cable connects a PC’s DB-9
RS-232 serial port to the miniature RS-232 serial
port on the DTX-1800 and DTX-1200 testers. This
cable is included with the DTX-1800 and is
available from Fluke Networks. Table 13-4 on page
13-38 shows the pin connections for this cable.
4
Select Utilities > DTX Utilities > Software Update from
the LinkWare menu, locate and select the .dtx (DTX
update) file; then click Open.
5
The tester reboots, then prompts you about updating
the smart remote’s software. Press K OK to update
the smart remote’s software.
6
To verify the update, turn the rotary switch to SPECIAL
FUNCTIONS; then select Version Information.
amd72f.eps
Figure 13-1. Updating the Software with a PC
USB or
DTX RS-232
serial cable
TEST
LOW BATTERY
TONE
TALK
FAIL
TEST
PASS
TALK
TALK
MONITOR
ENTER
TEST
SAVE
SPECIAL
FUNCTIONS
SETUP
AUTO
TEST
SINGLE
TEST
EXIT
F1 F2 F3
To Next Page
Loading...
