103
do not play with the appliance.
• Please place Beambox on an even surface.
• Please use Beambox in a well ventilated place.
Fumes and smoke generated during the engraving
process should be extracted from the room.
• This product should not be used in the immedi-
ate vicinity of water, such as bathtubs, washbowls,
swimming pools etc. where the likelihood of im-
mersion or splashing could occur.
• Do not stare at the bright and intense light ap-
pearing during the engraving process. Also we
recommend not to stare at the light even through
optical instruments. Doing so can cause serious
eye damage, even permanent blindness.
• Operators should keep a fire extinguisher at the
facility since laser may lead to an unexpected fire
outbreak.
• Do not move or lift the system alone. Always seek
assistance of one or two other people, in case you
need to change the system’s position. The weight
of the system may lead to injury.
To Previous Page
Loading...
Need help?
General
