Flux Beambox User Manual

26
▲
Single click or drag an area
If the machine menu is blank when clicking on the
camera button, it means the connection between
the computer and the machine was not set up
properly. Check "Cannot Connect to the Machine"
(p.101).
3.3 Importing the Test File
Click on Menu > File > Samples > First Engraving.
Click on Export, select your machine and click Start to
start the task.

Flux Beambox Specifications

General

Laser Power	40W
Weight	22 kg (48.5 lbs)
Laser Type	CO2
Camera	Yes
Connectivity	Wi-Fi
Supported File Types	SVG, DXF, JPG, PNG
Power Supply	110V/220V