45
・
How To Clean Cloudy Acrylic
It is recommended that the film should remain on the
acrylic when processing, unless engraving greyscale
images. Use an alcohol swab to clean the acrylic,
please note that too much may cause other surface
defects.
5.5 Paper
・
How To Reduce Burn Edge On Paper
When cutting white paper, it is easy to produce a
yellowish carbonized burn edge. The use of universal
clay or other low-viscosity substances can effectively
remove the toner to a certain extent without
damaging the surface of the paper.
・
Corrugated Cardboard
When cutting corrugated paper, the cardboard might
catch on fire due to the misfocus on the downward
layer. Spray the board with water to reduce the
chance of burning.
To Next Page
Loading...
Need help?
General
