Flux Beambox User Manual

57
7.5 Water Cooler Maintenance
It is recommended that the water should be changed
once every 3 months.
󱦯
Remove the screw on the handle of the back lid
and open the lid. If you're only adding water, skip to
step
󱦵
after opening the lid.
󱦱
Remove the hose clamp with pliers and pull apart
the hose from the white connector of the flow sensor.
Place the two ends of the hose into a container to
prevent water from spilling out.

Flux Beambox Specifications

General

Laser Power	40W
Weight	22 kg (48.5 lbs)
Laser Type	CO2
Camera	Yes
Connectivity	Wi-Fi
Supported File Types	SVG, DXF, JPG, PNG
Power Supply	110V/220V