52
7.2 Keep Everything Lubricated
Cleaning and lubricating the guiding rods and rail
periodically can extend the lifetime of the moving
parts. The frequency recommended is once every 1 -
2 weeks.
Wipe away the oil grease on the guiding rods and
rail using a paper towel.
Apply lubricant on the guiding rods of the Y-axis.
Apply lubricant on the top and the side of the
linear rail of the X axis.
Move the laser head up-and-down, left-and-right
several times to evenly distribute the lubricant.
To Next Page
Loading...
