Flux Beambox User Manual

65
Adjustment guide for the screws of the mirror:
Shots made on the reference point (top-left in this case)
rarely moves when adjusting the screws. So we try to
adjust the shot on the adjustable point (bottom-left in
this case) by the screws and move the point toward the
reference point until they overlap.
7.6.2 Second Reflecting Mirror
Goal: Make the 2 dots shot from
the middle-left and the middle-right
overlap.
Directions:
󱦯
Take a piece of tape and put it on the metal ring
in front of the third mirror.

Flux Beambox Specifications

General

Laser Power	40W
Weight	22 kg (48.5 lbs)
Laser Type	CO2
Camera	Yes
Connectivity	Wi-Fi
Supported File Types	SVG, DXF, JPG, PNG
Power Supply	110V/220V