73
The power of the laser can be distributed evenly
to any location on the working area after the
adjustments above. The performance should meet
the needs of regular operation. Please run "Camera
Calibration" again after the optical adjustment. If the
verticality of the optical path is required in specific
applications, the steps below can be carried out for
advanced adjustments.
7.6.5 Verticality of the Optical Path (Advanced
Adjustment)
Goal: Both dots on the lens holder and the laser
beam outlet be on the center of the circle.
Directions:
Move the laser head to the center of working area
manually. Place a piece of tape on the metal ring in
front of the third reflecting mirror.
Close the door and press "Laser Pulse".
To Next Page
Loading...
Need help?
General
