CH7 MAINTENACE ......................................... 051
7.1 Touch Panel - Maintenacne................... 051
7.2 Keep Everything Lubricated.................. 052
7.3 Cleaning The Work Area....................... 053
7.4 Wiping The Lens................................... 054
7.5 Water Cooler Maintenance.................... 057
7.6 Optical Path Adjustment....................... 060
7.6.1 First Reflecting Mirror............ 062
7.6.2 Second Reflecting Mirror....... 065
7.6.3 Laser Head Adjustment.......... 069
7.6.4 Third Reflecting Mirror........... 071
7.6.5 Verticality of the Optical Path. 073
7.7 Laser Tube Replacement...................... 077
CH 8 TROUBLESHOOTING ............................. 090
8.1 No Laser Beam Output .......................... 091
8.2 Cut Didn’t Go Through Material............ 091
8.3 #900 Cooler Off..................................... 091
8.4 #901 Door Opened ............................... 092
8.5 #902 Overheated................................... 093
8.6 Laser Head Doesn’t Return Home......... 094
8.7 Camera Alignment Issue....................... 095
8.8 Camera Preview Speed Is Too Slow....... 095
To Next Page
Loading...
Need help?
General
