Flux Beambox User Manual

70
▲
above horizontal center
▲
below horizontal center
󱦻
If the height is below the center line, adjust the
screws of the laser tube holder. Release the holder on
the laser beam outlet side and tighten the other side.
▲
Tighten
▲
Loosen
󱦽
Check if the dot overlaps or lands above the
center line. The first and second mirrors might require
readjustments if the position of the laser tube holder
is adjusted a lot.

Flux Beambox Specifications

General

Laser Power	40W
Weight	22 kg (48.5 lbs)
Laser Type	CO2
Camera	Yes
Connectivity	Wi-Fi
Supported File Types	SVG, DXF, JPG, PNG
Power Supply	110V/220V