97
8.10.2 Unable to Connect When Selecting Wi-Fi
The Wi-Fi encryption mode should be WPA2 or no
password.
The encryption mode can be set in the Wi-Fi
router administration interface. If the router doesn’t
support WPA2 and you need help picking out the
right router, please contact FLUX Support.
8.10.3 Machine Doesn’t Appear In The Software
Go to touch panel: Settings > Internet and
confirm the machine IP address. If the IP address
starts with 169.154, please see IP Address Starts With
169.154 (p.100).
Go to software: Menu > Beam Studio >
Preferences, and fill out the Machine IP Address
column.
If the machine doesn’t appear, please see Confirm
Connection (p.98).
To Next Page
Loading...
Need help?
General
