Fortinet FortiFone - IP Address Configuration; Subnet Mask Configuration

Personalizing your Phone Page 8 FortiFone™ User Guide for FON-260i
IP Address
Assigning a static address for the Network Mode requires manual entry of an IP address and
other parameters stated in the previous section. The phone requires a valid available IP address
for proper operation.
To set the IP Address:
• Press the button, select 1. Network Configuration then press the OK button.
• Select 2. IP Address then press the OK button.
• Input the IP Address using the dial pad and press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.
Subnet Mask
Selecting static addressing for the Network Mode requires manual entry of a subnet mask. The
IP phone requires a valid subnet for proper operation.
To enter the Subnet Mask:
• Press the button, select 1. Network Configuration then press the OK button.
• Select 3. Subnet Mask then press the OK button.
• Input the Subnet Mask using the dial pad and press the OK button to save your
configuration.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.
Default Gateway
Selecting static addressing for the Network mode requires manual entry of a default gateway
address. The IP Phone requires a valid default gateway address for proper operation.
To assign the Default Gateway address:
• Press the button, select 1. Network Configuration then press the OK button.
• Select 4. Default Gateway then press the OK button.
• Input the Default Gateway IP address using the dial pad and press the OK button to save
your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.
Primary DNS Address
Using an FQDN (Fully Qualified Domain Name) for any of the servers in the IP phone
configuration, requires entry of a primary DNS IP address. The IP phone contacts the primary
DNS server to resolve the FQDN to an IP address.
To assign the Primary DNS Address:
• Press the button, select 1. Network Configuration then press the OK button.
• Select 5. Primary DNS Address then press the OK button.
• Input the Primary DNS Address using the dial pad and press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.