Fortinet FortiFone - Dial Plan; Digit Map Table Configuration

Using Web Manager for Configuration Page 37 FortiFone™ User Guide for FON-260i
Dial Plan
The phone incorporates a dial plan, which monitors the user-dialed digits for patterns matching
the dial plan number. If a match occurs, the phone modifies the digits and processes the call
using the configured script in the dial plan.
Digit Map Table
Using the Digit Map Table, a string of 512 characters may be entered to define the dial plan.
Within the string, individual numbers are entered, separated by a '|'. In addition to dial pad
digits, special characters may be entered as follows:
The dial plan can include modification of a matching dialed number before call set-up. The Digit
Map Process defines the modification procedures for a number. The process may include:
• TRNC: Defines the number of digits to delete (truncate) from the number dialed.
• Pre: Defines the digits to insert in front of the number (including if truncated).
• Post: Defines the digits to insert at the end of the number (including if truncated).
x matches any single digit (0 to 9).
T inserts a timed pause for additional digits.
.
matches any number of occurrences of a digit, including zero occurrences and
includes special character matches.
+
matches any number of occurrences of the previous match, including special
characters.
[ ]
matches a digit from a group of digits. This character combination is used with "." to
define a range, [2-6] matches any digit from 2 to 6 inclusive.