Using Web Manager for Configuration Page 34 FortiFone™ User Guide for FON-260i
• STUN Port: If required, enter the port used for the STUN server.
• MWI Usage: Enable for indication of new messages for the registered voicemail system.
When done, press the Save button to store settings to the phone.
LAN Configuration
The LAN Configuration page is used to set the network parameters required for proper
operation when connected to a LAN. If using DHCP, then the values should be automatically
filled and no edits required. For manual configuration, see the network administrator for IP
information.
• Network Selection: Select Static or DHCP. If Static selected, then manually assign the
required IP parameters.
• Desired IP Lease Time: This is the IP Address Lease Time value included in DHCP packet
made from the phone in DHCP mode.
• IP address: A valid IP address is required for the phone.
• Subnet Mask: Enter the subnet mask for the LAN.
• Default Gateway: Enter the default gateway IP address of the LAN.
• Mac Address: Shows the MAC address of the phone LAN port. Not editable.
• Primary DNS: IP address of the primary DNS server.
• Secondary DNS: IP address of an auxiliary DNS server. Optional
• Domain Name: Domain name for the LAN. Optional
When complete, select the Save button to store the new values to the phone.
Changing the proxy server address, proxy port, outbound proxy, backup proxy, VMS address or
local UDP port requires a reboot of the phone.
The MAC address is fixed and cannot be modified.
The IP address, subnet mask, etc. can only be changed if the static Network Mode is assigned.
Changing any values on the LAN page requires a reboot.
To Next Page
Loading...
