Using Web Manager for Configuration Page 35 FortiFone™ User Guide for FON-260i
Call Preferences
Most of the call preference parameters can be altered according to the user’s requirements.
• Anonymous Call Block: When enabled, the phone blocks incoming calls with an anonymous
Caller ID.
• Call Waiting Function: When enabled, the phone will accept additional calls and notify the
user visually of the incoming call while in a conversation. If disabled, no additional calls are
accepted and the system will follow the busy response configuration.
• Call Waiting Tone: When enabled, a tone is played to the user along with Caller ID
information to announce the new call.
• Call Hold Ringback: When enabled, the phone rings if the user has taken a 2nd call then
terminated the call with another caller still on hold.
• Message Waiting Tone: When enabled, a stutter dial tone is played when first going off-hook
and a new message is waiting. The visual LED notification is always enabled for voicemail
notification.
• Auto Answer: When enabled, it will automatically activate the speakerphone when an
incoming call is received.
• Access Code Prefix: To simplify dialing from the Phonebook or Call Logs, enter a hunt group
(9, 81-88) that you would like the phone to use as a prefix to place calls using the specified
hunt group. If direct line access is enabled for the extension, then leave blank.
To Next Page
Loading...
