Personalizing your Phone Page 23 FortiFone™ User Guide for FON-260i
Call Waiting Tone
While in a call, the phone can provide a tone over the existing conversation to indicate a call
waiting. To receive the tone, Call Waiting must also be enabled.
To enable/disable Call Waiting Tone:
• Press the button, select 4. Call Preferences then press the OK button.
• Select 3. Call Waiting Tone then press the OK button.
• Using the navigation buttons, select On to enable Call Waiting Tone, or Off to disable Call
Waiting Tone. Press the OK button.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.
Call Hold Ringback
With Call Hold Ringback enabled, the phone rings if the first call is placed on hold then a
second call is taken and terminated by hanging up the phone. It is a reminder that there is still a
call on hold.
To enable/disable Call Hold Ringback:
• Press the button, select 4. Call Preferences then press the OK button.
• Select 4. Call Hold Ringback then press the OK button.
• Using the navigation buttons, select On to enable Hold Ringback, or Off to disable Hold
Ringback. Press the OK button.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.
Message Waiting Tone
When the notification of a new message is received, the Message LED flashes. As an option, a
brief “stutter” dial tone will provide an audible indication for a message waiting when going off
hook to place calls.
To enable/disable stutter dial tone for a message wait indication:
• Press the button, select 4. Call Preferences then press the OK button.
• Select 5. Msg Waiting Tone then press the OK button.
• Using the navigation buttons, select On to enable the stutter dial tone, or Off to disable the
stutter dial tone. Press the OK button.
• Press the Back softkey or the button to exit the menu.
• Move to another parameter with the navigation buttons and continue the session or press
the button to exit the configuration session.
To Next Page
Loading...
