Fortinet FortiFone - Direct Call Features

Using Web Manager for Configuration Page 36 FortiFone™ User Guide for FON-260i
Call Forwarding
• Call Forwarding: is not supported directly by the FortiVoice phone. Call forwarding is
configured in the FortiVoice system for busy, no answer and DND conditions for the
extension.
Direct Call
• Direct Call (Hotline/Warm-Line): When used with the FortiVoice system, the feature is
controlled by the configuration in the software for this extension. No configuration is
required.
• Direct Call: when enabled, places a call to a predefined destination automatically when the
phone goes off hook.
• Direct Call Number: defines the destination for a direct call.
• Direct Call Timer: sets a delay timer for Warm-Line operation. The timer specifies the period
before placing a direct call. The timer supports 1 second increments from 0–10 seconds. For
Hotline operation, set the timer to 0 seconds.
To modify parameters on the Call Preferences screen:
• Select the desired parameter and enter or select the new values.
• When complete, select the Save button to save the new values to the phone.