Fostex MR8 Mk2 User Manual

15
MR-8mkII Owner’s Manual (Read this chapter first!)
[TRIM] control
You must pay great attention to the [TRIM] control adjustment when recording to the MR-8mkII.
The analog signal received at each input ([INPUT A] and [INPUT B]) is sent to the TRIM control,
by which the signal level fed to the A/D converter of the MR-8mkII is controlled.
You can check this level by the PEAK indicator. If the level is too high, the PEAK indicator lights,
while you may hear the sound distorted or noisy. This distortion (noise) generated at this stage
cannot be eliminated, therefore, adjust the TRIM control properly so that the PEAK indicator
does not light at the loudest part of the input signal.
BRIT STACK US METAL 60'S COMBO
MIC
TUBECONDENSERDYNAMIC
INPUT A
LINE
MIC
MIN
MAX
LINE
MIC
DISTORTION
GUITAR
UNBAL
BAL
UNBAL
/GUITAR
PEAK
TRIM
TRIM
BAL
INPUT A INPUT B
PHONES VOL
L
ST OUT
R
2
PHONES
1
MIN
MAX
EFFECT
REVERB/DELAY TIME
INPUT A SELECT
AMP SIMULATION
MIC SIMULATION
PEAK
[TRIM] control
PEAK LED
Clipping level
Clipping level
Proper level
The level is too high.

Fostex MR8 Mk2 Specifications

General

Brand	Fostex
Model	MR8 Mk2
Category	Recording Equipment
Language	English