EasyManuals Logo

Fostex MR8 Mk2 User Manual

Fostex MR8 Mk2
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
51
MR-8mkII Owner’s Manual (Advanced playback and locate functions)
Locating to the LOCATE A or LOCATE B point
You can set the desired point of a song as the LOCATE A or LOCATE B point.
The LOCATE A and B points can be used not only for locating, but also for auto punch in/out,
play modes and part editing, etc.
Setting the LOCATE A or LOCATE B point
You can set the LOCATE A or LOCATE B point while the recorder is running or stops at the
desired point, regardless of time base setting.
<Note>:
The LOCATE A point must be earlier than the LOCATE B point. If not, you cannot carry
out the auto punch in/out or loop function correctly.
<Tip>: While the time base is set to the bar/beat mode, if you set the "Beat resolution" menu
item in the menu mode to "On", you can store the LOCATE A or B point in beat resolution. In
other words, the clock digit of the Bar/Beat/Clk value is automatically rounded down or up, so
that the clock digit is always "000".
See page 136 for details about how to make the beat resolution active or inactive.
<Note>:
You cannot set the LOCATE A or B point for a protected song. If you are going to do so,
the warning message ("This song is protected!") is shown. To set the LOCATE A or B point for a
protected song, release the protection first (see page 93).
To set the LOCATE B point:
When the recorder is playing back (or stopped),
press the [LOCATE B/OUT] key at the desired
point while holding down the [STORE] key.
The display briefly shows "Store LOCATE B", and
the point when pressing the [LOCATE B/OUT]
key is stored as the LOCATE B point.
To set the LOCATE A point:
When the recorder is playing back (or stopped),
press the [LOCATE A/IN] key at the desired point
while holding down the [STORE] key.
The display briefly shows "Store LOCATE A",
and the point when pressing the [LOCATE A/IN]
key is stored as the LOCATE A point.
LOCATE REC END
A-B PLAY
LOCATE ABS ZERO
DELETE+-_0YZ9VWX8STU7
PLAYSTOPRECORD REWIND F FWD
PQR6
UNDO/REDO
PLAY MODE
STORE
A / IN B / OUT
LOCATE
MNO5JKL4
BRIGHTNATURALPOWERFUL
MENU/ENTER
MASTERING
AUTO PUNCH
LOCATE REC END
A-B PLAY
LOCATE ABS ZERO
DELETE+-_0YZ9VWX8STU7
PLAYSTOPRECORD REWIND F FWD
PQR6
UNDO/REDO
PLAY MODE
STORE
A / IN B / OUT
LOCATE
MNO5JKL4
BRIGHTNATURALPOWERFUL
MENU/ENTER
MASTERING
AUTO PUNCH
Press the [LOCATE A/IN] key while
holding down the [STORE] key.
Press the [LOCATE B/OUT] key while
holding down the [STORE] key.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fostex MR8 Mk2 and is the answer not in the manual?

Fostex MR8 Mk2 Specifications

General IconGeneral
BrandFostex
ModelMR8 Mk2
CategoryRecording Equipment
LanguageEnglish

Related product manuals