EasyManuals Logo

Fostex MR8 Mk2 User Manual

Fostex MR8 Mk2
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
61
MR-8mkII Owner’s Manual (Using effects)
Selecting an effect type
The MR-8mkII has the original built-in reverb/delay processor featuring the newly-developed
algorithm. You can apply the reverb or delay to playback signals of tracks 1 through 4 during
mixdown and track bouncing.
Details of each effect type
ROOM
HALL
PLATE
DELAY
Simulates reverberation in a medium-sized
room. When you select "ROOM", you can
adjust the reverb time using the [REVERB/
DELAY TIME] control.
Simulates reverberation in a hall with moder-
ate early reflection.
When you select "HALL", you can adjust the
reverb time using the [REVERB/DELAY
TIME] control.
Simulates a plate reverb with a wide fre-
quency range.
When you select "PLATE", you can adjust the
reverb time using the [REVERB/DELAY
TIME] control.
Adds delay effects. You can select the de-
sired delay types using the "Delay Type" item
of the System menu in the menu mode (you
can easily access to the "Delay Type" setting
screen by a long press of the [DELAY] key).
Three delay types are available: Mono, L-R
and Diff. See below for details.
When you select "ROOM", you can adjust
the delay time using the [REVERB/DELAY
TIME] control.
2) Rotate the JOG dial to select "System", and press
the [MENU/ENTER] key.
The display now shows the system menu
screen, where "<< Back" is highlighted.
You can select an effect type from among three
reverb options (ROOM, HALL and PLATE) and
a delay (DELAY) by using the keys in the [EF-
FECT] section shown below.
1) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially.
When you use the delay effect, you can select
a delay type.
3) Rotate the JOG dial to select "Delay Type" and
press the [MENU/ENTER] key.
The current delay type starts flashing and you
can now select from among three options
shown below ("L-R" is initially selected).
EFFECT
REVERB/DELAY TIME
MIN MAX
HALLROOM
PLATE DELAY
Selecting a delay type
Using the reverb or delay
[ROOM] key
[PLATE] key
[HALL] key
[DELAY] key

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fostex MR8 Mk2 and is the answer not in the manual?

Fostex MR8 Mk2 Specifications

General IconGeneral
BrandFostex
ModelMR8 Mk2
CategoryRecording Equipment
LanguageEnglish

Related product manuals