79
MR-8mkII Owner’s Manual (Rhythm guide function)
4) Rotate the JOG dial to select "---Bar -> ---", and
press the [MENU/ENTER] key.
The display now shows the screen for setting
the new time signature event, where "<< Back"
is highlighted.
Bar 1 through bar 3: 4/4
Bar 4 through bar 7: 3/4
Bar 8 through bar 11: 4/4
Bar 12 through bar 15: 5/8
Bar 16 through the last bar: 3/4
5) Rotate the JOG dial to select "Bar = 2Bar", and
press the [MENU/ENTER] key.
"2Bar" starts flashing and you can now set the
bar number.
6) Rotate the JOG dial to enter the desired bar
number, and press the [MENU/ENTER] key.
In this procedure example, enter "4Bar". The
display returns to the previous screen.
7) Rotate the JOG dial to select "Sig. = 4/4", and
press the [MENU/ENTER] key.
"4/4" starts flashing and you can now set the
time signature.
8) Rotate the JOG dial to select the desired time
signature, and press the [MENU/ENTER] key.
In this procedure example, enter "3/4".
The display returns to the previous screen.
9) Rotate the JOG dial to select "[ENTER]" at the
bottom, and press the [MENU/ENTER] key.
The new time signature event is set and the
display shows the screen as below.
In this condition, the song is played in 4/4 from
bar 1 to bar 3 and in 3/4 from bar 4.
Repeat steps 5 through 9 until creating all nec-
essary events.
flashing
flashing
flashing
flashing
To Next Page
Loading...
Need help?
General
