Fox Thermal FT3 - Clearing the Data Log

Data Logger | 107
Model FT3
Data Logger
Model FT3
F1 F2 F3 F4
NOTE! If the hardware does not detect a real time clock, the LOG menu key will not be
displayed.
Press F3 for (LOG). The screen will show:
F1 F2 F3 F4
The default is set with the data logger enabled, press F1 (NXT) to turn the data logger ON or OFF
(the default is ON).
Press F4 (OK) to continue.
F1 F2 F3 F4
Clearing the Data Log
From the data log menu, press F1 (CLR).
F1 F2 F3 F4
The screen will show:
F1 F2 F3 F4
Press F1 (YES) to conrm or F4 (NO) to cancel.
SET I/O
INP OUT LOG EXIT
Data log = ON
NXT OK
DATA LOG
CLR STR TIM EXIT
DATA LOG
CLR STR TIM EXIT
Clear Log?
YES NO