Fox Thermal FT3 - Setting the Real Time Clock

Data Logger | 109
Model FT3
Data Logger
Model FT3
Press F1 (YES) to set the start/sync time for Day:Hour:Minute.
NOTE! Make sure that the specied time has not been reached yet.
Setting the Real Time Clock
From the Data Log menu, press F3 (TIM). The screen will show:
F1 F2 F3 F4
Press F1 (SET):
F1 F2 F3 F4
Press F1 (CHG) to change the years, F4 (OK) to continue.
F1 F2 F3 F4
Press F1 (CHG) to change the month, F4 (OK) to continue.
F1 F2 F3 F4
Press F1 (CHG) to change the day/date, F4 (OK) to continue.
F1 F2 F3 F4
Press F1 (CHG) to change the hours, F4 (OK) to continue.
Date/Time
SET VIEW EXIT
Year Set = 13
CHG OK
Month Set = 10
CHG OK
Day Set = 28
CHG OK
Hour Set = 13
CHG OK