PostBase Mini
58
11.9 Connection to data centre
The PostBase Mini franking machine needs a connection to the data centre (Franco-
typ-Postalia Infrastructure) in order that it can download funds and data. The connec-
tion configuration is part of the installation procedure during commissioning. You
should verify and, if necessary, correct the settings if changes were made to your sys-
tem environment. In case of problems, please contact your network administrator.
• Open the M
ENU.
•Select M
ANAGE CONNECTION.
PostBase Mini shows the current connectiv-
ity settings.
Changing the connectivity settings
• Press the button to open the
‘Connectivity Wizard’.
• Simply follow the instructions on the
display. The PostBase Mini successively
prompts you to specify all necessary
details.
When finished, PostBase Mini displays the
selected connection configuration.
• Press the button to accept the connec-
tivity settings and to check the connection.
The chart on the following pages gives an
overview of the possible connection settings
and parameters.
To Next Page
Loading...
