69
10 LAYOUTS & SWITCHES
10 LAYOUTS & SWITCHES
Footswitch operation on the FM3 is organized around Layouts. A layout is a set of up to 12 footswitch denitions,
each with one Tap and one Hold function. You can change layouts on the fly to change what each of the
footswitches does. For example, one layout might be used to select Presets or Scenes, while a different layout
operates the Looper. The FM3 provides eight layouts, and any switch can be completely customized to your
choice of functions, colors, and more. Layouts even have their own names to make navigating easier.
While not performing, you can easily change the layout on the FM3 itself by turning the FC Layout knob on the
Home page.
THE MASTER LAYOUT MENU
Switching from one layout to another is the key to the versatility of the FM3. There are many ways to do this,
but the built-in Master Layout Menu (“MLM” for short) is very powerful. The Master Layout Menu grants instant
access to other layouts, one per footswitch.
To show the Master Layout Menu, press and hold the middle footswitch from any of the factory layouts.
For an introduction, see “The Master Layout Menu” on p. 8.
To Next Page
Loading...
