91
13 SETUP MENU
GLOBAL SETTINGS: OUT 1 EQ PAGE
OUT 1 EQ provides a 10-band graphic EQ, plus a master GAIN adjustment control. Use these to make global
adjustments to the tone or level of ALL presets. This is convenient when you need to compensate for using a
different amp or speakers, or if a particular performance space seems overly bright or boomy. The master GAIN
fader should be used with care as it can cause clipping, and lowering it can affect the signal-to-noise ratio. This
EQs affect ONLY the Analog outputs. SPDIF and USB are not affected.
Output 1 Global EQ settings apply to all instances of the Output 1 mix signal, including the Output 1 balanced
jacks, unbalanced jacks, headphones jack, and signal which might be routed to USB or digital outs.
GLOBAL SETTINGS: CUSTOM SCALES PAGE
The Scales page is used to congure scales for the Custom Shifter type in the Pitch block.
See "The Fractal Audio Blocks Guide" for more on this effect.
PARAMETER Description
Custom Scale Number
1–32
Selects from among the 32 global custom scales available to edit using the 12
parameters which follow.
___ SHIFT (+/- 24) These 12 parameters are used to set the shift amount for each of the 12 steps
of the chromatic scale. Range is +/-24 semitones (+/- two octaves). To set up
a custom scale, select its number in the eld above and then set each of the
12 pitch values as desired. Changes take effect immediately, with no need to
STORE. Soft-buttons provide options to reset a selected value or all values in
the current scale to the default value of +/- 0 semitones.
To Next Page
Loading...
