Adjustingthe seat backrestofthe rear bench
seat
%
If apartition is installed: therear benchseat
mustnot come intocontact withthe partition
at anytime.
#
Move theseat backresttothe desired posi‐
tion.
Head restraints
Adjustingthe headrestraints manually
&
WARNING Risk of injury from adjusting
thevehicle settings while thevehicle is in
motion
Youcouldlose control of thevehicle in the
following situations:
R
if youadjustthe driver's seat, thehead
restraint,the steering wheel or themirror
while thevehicle is in motion
R
if youfastenyour seat belt whilethe vehi‐
cle is in motion
#
Beforestarting theengine: adjustthe
driver's seat, thehead restraint,the
steering wheel or themirrorand fasten
your seat belt.
&
WARNING Risk of injury due to head
restraintswhichare notinstalled or are
adjustedincorrectly
If headrestraints arenot installed or are
adjustedincorrectly,the head restraintscan‐
notprovide protection as intended.
Thereisanincreased risk of injuryinthe
head and neckarea, e.g. in theevent of an
accident or when braking.
#
Alwaysdrive withthe head restraints
installed.
#
Beforedriving off, makesurefor every
vehicle occupant that thecenter of the
head restraint supports thebackofthe
head at about eyelevel.
Do notinterchangethe head restraintsofthe
front and rear seats. Otherwise, youwill notbe
able to setthe height and inclination of thehead
restraintstothe correct position.
Using thehead restraint fore-and-aftadjustment,
adjustthe head restraint so that it is as close to
thebackofthe head as possible.
Head restraint (example of comfort head restraint
on thedriver's seat)
#
To raise: pull thehead restraint upwards into
therequired position and ensurethat the
head restraint is engaged.
Onlyuse thehead restraint in theengaged
state.
#
To lower: push release button 1 and slide
thehead restraint downwardsintothe
required position and ensurethat thehead
restraint is engaged.
Onlyuse thehead restraint in theengaged
state.
#
To move forwards: pushrelease button 2
and pull thehead restraint forwards until it
engages in therequired position.
#
To move backwards: push release button 2
and slide thehead restraint backwards into
therequired position.
72
Seats and stowage
To Next Page
Loading...
